Demand is process-driven
Furnaces, rolling, casting, melting, finishing, and large motor starts can create concentrated load and demand exposure.
Evidence to connectkW, power factor, cycle, tonnes
Lower energy per tonne. Keep the melt schedule.
MEP connects furnaces, large motors, compressed air, cooling, demand, power quality, and supply economics to cost per tonne and production continuity.
Start with one site or a complete facility list. NDA available before data is shared.Selected steel and metals relationships
Relevant operating experience for steel and metals decision makers
Energy issues that affect operations
MEP tests each opportunity against production, quality, reliability, and capital requirements before recommending action.
Heat value is often lost
Exhaust and cooling streams may contain useful energy, but recovery depends on temperature, timing, and process fit.
Evidence to connectTemperature, flow, simultaneity, run hours
Power quality affects production
High-load equipment can interact with voltage, harmonics, flicker, and protection conditions.
Evidence to connectEvents, harmonics, trips, protection settings
Fieldwork follows the operating condition
Measurements and site conditions define the scope. Technology selection follows the baseline and constraint review.
Process power
Map electrical demand and quality by production stage, equipment group, and operating cycle.
First lookInterval data, single-line diagrams, events, production log
Furnaces and heat recovery
Evaluate combustion, electrical heating, exhaust, cooling, and recoverable thermal value.
First lookFuel or kWh, temperatures, output, schedule
Motors and compressed air
Review large drives, pumps, fans, air generation, controls, and distribution losses.
First lookMotor list, pressure, flow, speed, utilization
Tariff and supply
Compare commercial options against volatile demand, power factor, production plans, and contract exposure.
First lookBills, interval data, forecast, proposals
What each decision owner must approve
The analysis gives each owner the information needed to test assumptions and approve, revise, defer, or stop the work.
Decision ownerQuestion to answerMEP output
Production
Will the measure affect cycle time or metallurgical conditions?
Process constraints and baseline linked to production
Engineering
Which system conditions can be corrected?
Measured findings and technical requirements
Finance
What is the effect per saleable tonne?
Output-sensitive financial model
Procurement
Which energy and equipment proposals are comparable?
Normalized assumptions, guarantees, and risk
Energy cost per tonne diagnostic
MEP confirms scope after reviewing the facility profile, the current decision, and the available operating data.
Request the starting reviewManagement outputs
- Electrical and thermal baseline by production stage
- Power quality and major system findings
- Heat recovery and commercial scenarios
- Prioritized investment and verification plan
Share the site list, current decision, and available evidence.
An MEP advisor will provide an initial review within 1 business day and state whether further diagnostic work is warranted.
Request a portfolio review- Vendor-neutralCompensated only by the client
- CEMCertified Energy Manager
- CMVPCertified Measurement and Verification Professional
- ISO 50001Lead Auditor
- ASHRAEMember, ASHRAE 211 methodology
- IPMVPVerified engagements
- Since 2015Mexico City and New York
Feedback from operating and procurement teams
Organizations remain confidential. Verification contacts are available during qualified evaluation.
The energy audit recommendations were practical and supported by solid financial and operational rationale, making them easy to evaluate and act upon.
Lori C.
Procurement Manager, Global Auto Parts Supplier
The energy study was very well done and delivered real results. The team took the time to understand how our plant actually operates and provided clear, practical recommendations.
Ismael H.
Plant Manager, Global Mining Company
The support we received on our Power Purchase Agreement was excellent. The team conducted a detailed and professional review.
Héctor V.
Plant Manager, Global Battery Manufacturer
Feedback from completed engagements. Client identities remain confidential. Individual results depend on facility profile, tariff, contract terms, and execution.
Request an assessment. Get a preliminary analysis in 1 business day.
MEP will show you where cost and risk sit at this mill before you commit to anything. Four fields to start.
- Reply from a senior advisor, not a sales team
- NDA available before any document is shared
- MEP sells no equipment and takes no supplier commissions